One pair of 3.5mm snap (male) to 2.0mm pin (male) adapters for TENS / EMS electrode leads.
You want this if you have a TENS or EMS unit that has snap style cables and you want to also use 2mm pin style TENS electrode pads.
Simply insert the snap from your TENS or EMS leads into the ends of the adapters. Then attach the adapters to the pin wire on the pads.
Note: The 2mm pin and 3.5mm snap are the most common sizes of electrode wire connectors on the market. However, you should ensure that you are ordering the correct item in the correct size.
No posts found